200-125 Guide

All About 200-125 exam prep Sep 2021

When it comes to Cisco Cisco certification exam, the majority of IT aspirants are usually excited but stressed. For the reason that Cisco 200-125 certification is his or her dream however they have excellent difficulty in getting it without having any aid. If you are normally the one who has no notion to prepare for the Cisco 200-125 exam, Exambible.org is the best position you should visit. The Cisco 200-125 exam dumps are high-quality as well as great useful which can ensure you any passing score. If you prepare for the Cisco 200-125 actual exam with the products stage by stage, you will help make full good results. You will always be very proud that you have got your Cisco Cisco 200-125 certification. It can also lay a good foundation for your career throughout IT planet.

2021 Sep 200-125 practice exam

Q1. - (Topic 9) 

Which standards-based First Hop Redundancy Protocol is a Cisco supported alternative to Hot Standby Router Protocol? 

A. VRRP 

B. GLBP 

C. TFTP 

D. DHCP 

Answer: A 


Q2. - (Topic 9) 

If primary and secondary root switches with priority 16384 both experience catastrophic losses, which tertiary switch can take over? 

A. a switch with priority 20480 

B. a switch with priority 8192 

C. a switch with priority 4096 

D. a switch with priority 12288 

Answer: A 


Q3. - (Topic 3) 

The network administrator needs to address seven LANs. RIP version 1 is the only routing protocol in use on the network and subnet 0 is not being used. What is the maximum number of usable IP addresses that can be supported on each LAN if the organization is using one class C address block? 

A. 8 

B. 6 

C. 30 

D. 32 

E. 14 

F. 16 

Answer: C 


Q4. - (Topic 9) 

Which type of address is the public IP address of a NAT device? 

A. outside global 

B. outside local 

C. inside global 

D. inside local 

E. outside public 

F. inside public 

Answer: C 


Q5. - (Topic 2) 

What are three benefits of implementing VLANs? (Choose three.) 

A. A higher level of network security can be reached by separating sensitive data traffic from other network traffic. 

B. A more efficient use of bandwidth can be achieved allowing many physical groups to use the same network infrastructure. 

C. A more efficient use of bandwidth can be achieved allowing many logical networks to use the same network infrastructure. 

D. Broadcast storms can be mitigated by increasing the number of broadcast domains, thus reducing their size. 

E. Broadcast storms can be mitigated by decreasing the number of broadcast domains, thus increasing their size. 

F. VLANs make it easier for IT staff to configure new logical groups, because the VLANs all belong to the same broadcast domain. 

G. Port-based VLANs increase switch-port use efficiency, thanks to 802.1Q trunks. 

Answer: A,C,D 


200-125 latest exam

Up to the immediate present 200-125 pdf exam:

Q6. - (Topic 1) 

A network administrator is verifying the configuration of a newly installed host by establishing an FTP connection to a remote server. What is the highest layer of the protocol stack that the network administrator is using for this operation? 

A. application 

B. presentation 

C. session 

D. transport 

E. internet 

F. data link 

Answer: A 


Q7. - (Topic 7) 

Scenario: 

Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. 

You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices. 









An OSPF neighbor adjacency is not formed between R3 in the main office and R4 in the Branchl office. What is causing the problem? 

A. There is an area ID mismatch. 

B. There is a Layer 2 issue; an encapsulation mismatch on serial links. 

C. There is an OSPF hello and dead interval mismatch. 

D. The R3 router ID is configured on R4. 

Answer: A 


Q8. - (Topic 2) 

Refer to the exhibit. 


Each of these four switches has been configured with a hostname, as well as being configured to run RSTP. No other configuration changes have been made. Which three of these show the correct RSTP port roles for the indicated switches and interfaces? (Choose three.) 

A. SwitchA, Fa0/2, designated 

B. SwitchA, Fa0/1, root 

C. SwitchB, Gi0/2, root 

D. SwitchB, Gi0/1, designated 

E. SwitchC, Fa0/2, root 

F. SwitchD, Gi0/2, root 

Answer: A,B,F 


Q9. - (Topic 2) 

Which statement about VLAN operation on Cisco Catalyst switches is true? 

A. When a packet is received from an 802.1Q trunk, the VLAN ID can be determined from the source MAC address and the MAC address table. 

B. Unknown unicast frames are retransmitted only to the ports that belong to the same VLAN. 

C. Broadcast and multicast frames are retransmitted to ports that are configured on different VLAN. 

D. Ports between switches should be configured in access mode so that VLANs can span across the ports. 

Answer: B 


Q10. CORRECT TEXT - (Topic 7) 



Answer: Corp1>enable 

Corp1#configure terminal 

Corp1(config)#access-list 100 permit tcp host 192.168.33.3 host 172.22.242.23 eq 80 

Corp1(config)#access-list 100 deny tcp 192.168.33.0 0.0.0.255 host 172.22.242.23 eq 

Corp1(config)#access-list 100 permit ip any any 

Corp1(config)#interface fa 0/1 sh ip int brief 

Corp1(config-if)#ip access-group 100 out 

Corp1(config-if)#end 

Corp1#copy running-config startup-config 


To know more about the 200-125, click here.

Tagged as : Cisco 200-125 Dumps, Download 200-125 pdf, 200-125 VCE, 200-125 pass4sure, examcollection 200-125