Abreast of the times 642-035: Testking real faq from 21 to 30

we provide Top Quality Cisco 642-035 answers which are the best for clearing 642-035 test, and to get certified by Cisco Troubleshooting Cisco Data Center Unified Computing. The 642-035 Questions & Answers covers all the knowledge points of the real 642-035 exam. Crack your Cisco 642-035 Exam with latest dumps, guaranteed!

Q21. What is the recommended procedure to update Cisco UCS C-Series rack-mount server firmware? 

A. Launch the Cisco UCS Firmware Update Utility from virtual media. 

B. Launch the Cisco UCS Host Update Utility from virtual media. 

C. Launch the Cisco UCS Server Update Utility from virtual media. 

D. Launch the Cisco UCS CIMC Update Utility from virtual media. 

Answer: B 

Q22. You are installing Microsoft Windows Server 2008 R2 on a Cisco UCS C210 M2 server, and the installer does not see local storage on the LSI MegaRAID SAS 9260-4i controller that is installed. Which statement explains the issue? 

A. The driver is not included in the installer DVD. Press F6 to load the LSI RAID driver from CD or virtual media. 

B. The virtual disk is not created and online. 

C. The LSI 9260-4i is only supported by Red Hat Enterprise Linux and VMware vSphere 

4.0 and later. 

D. The installer DVD for Microsoft Windows Server 2008 R2 did not include the LSI driver until SP2. 

Answer: B 

Q23. Which commands can you enter to see if a component in the Cisco UCS domain generated a core file? 

A. 6100-A# scope monitoring 6100-A /monitoring # scope sysdebug 6100-A /monitoring/sysdebug # show cores 

Core Files: Name Fabric ID 

B. 6100-A# scope sysdebug 6100-A /sysdebug # scope monitoring 6100-A /sysdebug/monitoring # show cores 

Core Files: Name Fabric ID 

C. 6100-A# scope system 6100-A /system # scope monitoring 6100-A /system/monitoring # show cores 

Core Files: Name Fabric ID 

D. 6100-A# scope cores 6100-A /cores # show cores 

Core Files: Name Fabric ID 

E. 6100-A# scope logging 6100-A /logging # scope monitoring 6100-A /logging/monitoring # show cores 

Core Files: Name Fabric ID 

Answer: A 

Q24. Refer to the exhibit. 

Which mistake did the UCS administrator make when trying to access the GUI? 

A. specified the incorrect login domain B. did not use the VIP 

C. tried to login before the GUI had fully booted up 

D. password is incorrect 

E. attempted to login to the subordinate cluster peer 

Answer: E 

Q25. A customer would like to create an Ethernet traffic monitoring session on a Cisco UCS server to troubleshoot network connectivity. The customer has entered the following commands via CLI: 

UCS-A# scope eth-traffic-mon UCS-A /eth-traffic-mon # scope fabric a UCS-A /eth-traffic-mon/fabric # create eth-mon-session EthMonitor33 UCS-A /eth-traffic-mon/fabric/eth-mon-session* # create dest-interface 2 12 UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # set speed 20gbps UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # commit-buffer UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface # 

Which outcome will this command sequence produce? 

A. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 2, port 12, will set the admin speed to 20 Gb/s, and will commit the transaction. 

B. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 2, port 33, will set the admin speed to 20 Gb/s, and will commit the transaction. 

C. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 33, port 12, will set the admin speed to 20 Gb/s, and will commit the transaction. 

D. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 2, port 12, will set the admin speed to 10 Gb/s, and will commit the transaction. 

Answer: A 

Q26. A customer calls in a trouble ticket and explains that after a power failure, the UPS was discovered to be defective and the Cisco UCS C210 M2 server running Windows 2008 R2 went down without proper shutdown. After restarting the server, you discover the RAID 5 array rebuilding parity. Which write-cache settings on the LSI MegaRAID 9260-4i controller explain this symptom? 

A. write back 

B. write through 

C. write back with BBU 

D. no write cache 

E. no hot spare 

Answer: A 

Q27. Which of these is a supported Cisco C-Series integration topology? 

A) 

B) 

C) 

D) 

A. Exhibit A 

B. Exhibit B 

C. Exhibit C 

D. Exhibit D 

Answer: B 

Q28. A customer is configuring an upstream disjoint Layer 2 network in a Cisco UCS domain. So far they have configured the following: 

Fabric Interconnects are in switching mode. 

There is symmetrical configuration for high availability. 

There are no overlapping VLANs. 

Each vNIC is communicating with one disjoint Layer 2 network. 

After validating the above, the customer is still having issues with network connectivity. What is the issue? 

A. Overlapping VLANs are allowed in a disjoint Layer 2 network. 

B. The vNIC configuration is incorrect and must communicate with two or more disjoint layer 2 networks. 

C. The fabric interconnect must be in end-host mode for a disjoint Layer 2 network. 

D. Asymmetrical configuration for high availability needs to be configured. 

Answer: C 

Q29. Looking at the Equipment > Chassis > Servers > Server X view from the Cisco UCS Manager GUI, which tab would you select to identify the fabric interconnect uplink associated with a given virtual circuit? 

A. Paths 

B. vNIC Paths 

C. Virtual Circuit Paths 

D. VIF Paths 

Answer: D 

Q30. Which remote access protocol is used by default to obtain CLI access to a Cisco UCS C-Series standalone server? 

A. Telnet 

B. SSH 

C. HTTP 

D. SSL 

E. SOCKS 

Answer: B