Free 1Y0-240 Dumps 2021

NEW QUESTION 1
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL virtual servers?

• A. SSL Policy
• B. SSL Profile
• C. SSL Bridge
• D. SSL Offload

Answer: B

NEW QUESTION 2
A Citrix Administrator wants to configure independent and isolated access on a single appliance for three different departments to allow them to manage and isolate their own applications.
How can the administrator isolate department-level administration?

• A. Configure dedicated routes in the admin partitions for each department.
• B. Configure Policy-based Routes for each department in the nsroot partition.
• C. Configure admin partitions that use dedicated VLANs.
• D. Configure a SNIP in each partition and bind a VLAN for the department.

Answer: B

NEW QUESTION 3
Scenario: A Citrix Administrator is concerned about the amount of health checks the NetScaler is sending to the backend resources. The administrator would like to find a way to remove health checks from specific bound services.
How can the administrator accomplish this?

• A. Use the No-Monitor option.
• B. Use Service Groups to minimize health checks.
• C. Unbind the current monitor.
• D. Use reverse condition monitoring.

Answer: A

NEW QUESTION 4
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down.
What can the administrator perform to resolve this issue?

• A. Disable Layer 2 mode on a NetScaler instance.
• B. Enable tagging on all interfaces.
• C. Enable Layer 3 mode along with Layer 2 mode.
• D. Enable MAC-based forwarding mode.

Answer: B

NEW QUESTION 5
A Citrix Administrator is configuring Unified Gateway with authentication policies. Where should the administrator configure NetScaler Gateway authentication policies?

• A. Global level
• B. Unified Gateway level
• C. Content-Switching level
• D. NetScaler Gateway level

Answer: D

NEW QUESTION 6
Before:
<link rel=”stylesheet” type=”text/css” href=”sheet/abc.css”>
<link rel=”stylesheet” type=”text/css” href=”sheet/xyz.css”>
After:
<link rel=”stylesheet” type=”text/css” href=”sheet/abc.css+ xyz.css”>
Which Front-End Optimization (FEO) action can a Citrix Administrator use to achieve the results above?

• A. Minify CSS
• B. Combine CSS
• C. Inline CSS
• D. Convert linked CSS

Answer: A

NEW QUESTION 7
Scenario: A Citrix Administrator of a Linux environment needs to load-balance the web servers in an environment. However, due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator do to load-balance the web servers in this scenario?

• A. Purchase a NetScaler SDX.
• B. Install a NetScaler CPX.
• C. Purchase a NetScaler MPX.
• D. Install NetScaler VPX.

Answer: B

NEW QUESTION 8
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding add rewrite policy POL_1 HTTP.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding “”identity”” add rewrite policy POL_2 “HTTP.REQ.IS_VALID” ACT_2
How can a Citrix Administrator bind the rewrite policies to the LB vserver lb_vsrv such that POL_2 is evaluated after POL_1 is evaluated successfully?

• A. bind lb vserver lb_vsrv –policyName POL_1 –priority 110 –gotoPriorityExpression NEXT–type REQUESTbind lb vserver lb_vsrv –policyName POL_2 –priority 100–gotoPriorityExpression END –type REQUEST
• B. bind lb vserver lb_vsrv –policyName POL_1 –priority 90 –type REQUESTbind lb vserver lb_vsrv –policyName POL_2 –priority 100 –type REQUEST
• C. bind lb vserver lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression NEXT–type REQUESTbind lb vserver lb_vsrv –policyName POL_2 –priority 100–gotoPriorityExpression END –type REQUEST
• D. bind lb vserver lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression END–type REQUEST bind lb vserver lb_vsrv –policyName POL_2 –priority 80–gotoPriorityExpression NEXT –type REQUEST

Answer: C

NEW QUESTION 9
Scenario: A Citrix Administrator used the commands in the screenshot to apply the user- agent check to all the virtual servers. However, the administrator observed that it is NOT being applied to the vServer lb_vsrv_www.
Click on the ‘Exhibit’ button to view the screenshot of the command-line interface.

What can be causing this issue?

• A. Pattern set is being used with global policies.
• B. Logging action is bound to the Responder policy.
• C. The bind type of the policy drop is Default Global.
• D. Two responder policies are bound to same vServer.

Answer: D

NEW QUESTION 10
View the Exhibit.

A Citrix Administrator has executed the commands in the screenshot on the NetScaler using the command-line interface.
Click on the ‘Exhibit’ button to view the screenshot of the command-line interface.
Which two replacements will be the outcome of executing these commands? (Choose two.)

• A. http:// will be replaced by https:// in the HTTP RESPONSE
• B. https:// will be replaced by http:// in the HTTP RESPONSE
• C. http:// will be replaced by https:// in the HTTP REQUEST
• D. https:// will be replaced by http:// in the HTTP REQUEST

Answer: BD

NEW QUESTION 11
Scenario: A user is attempting to access a web server which is load balanced by the NetScaler using HTTPS. The user received the following message:
SSL/TLS error: You have not chosen to trust “Certificate Authority” the issuer of the server’s security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?

• A. Ensure that the intermediate Certificate is linked to the Root Certificate.
• B. Ensure that the user has the Server Certificate installed.
• C. Ensure that the user has the Certificate’s Public key.
• D. Ensure that the intermediate Certificate is linked to the Server Certificate.

Answer: A

NEW QUESTION 12
Scenario: User authentication is failing through the NetScaler. A Citrix Administrator checked the Authentication, Authorization and Auditing (AAA) policy, action and virtual server and verified that the correct configuration was in place. The administrator bypassed the NetScaler and the authentication worked.
Which NetScaler utility can the administrator use to troubleshoot the access issue?

• A. aaad.debug
• B. Dashboard
• C. nscon message
• D. nslog file

Answer: A

NEW QUESTION 13
What is the effect of the set gslb parameter – IdnsprobeOrder DNS PING TCP command in an Active/Active Global Server Load Balancing (GSLB) setup?

• A. The order to calculate the Empty Domain Service (EDS) for Dynamic proximity will be the DNS UDP query followed by the PING and then TCP.
• B. The order to calculate the Round-trip time (RTT) for Dynamic proximity will be the DNS UDP query followed by the PING and then TCP.
• C. The order to calculate the Time to live (TTL) proximity will be the DNS UDP query followed by the PING and then TCP.
• D. The order to calculate the Multiple IP responses (MIR) for Dynamic proximity will be the DNS UDP query followed by the PING and then TCP.

Answer: C

NEW QUESTION 14
Scenario: A Citrix Administrator has configured the rewrite action as follows: add rewrite action sync_date replace http.res.date sys.time
What is the correct way to interpret this rewrite action?

• A. The rewrite action replaces the Date header in the http response with the GMT time stamp.
• B. The rewrite action replaces the Date header in the http response with the NetScaler system time in a conventional date format.
• C. The rewrite action is invalid, as system time CANNOT be referenced in the system policy.
• D. The rewrite action replaces the NetScaler system time with the Date header in a conventional date format.

Answer: C

NEW QUESTION 15
Scenario: A Citrix Administrator observes that when the client gets redirected to the URL www.citrix.com/owa/search?q-userbame, an HTTP 503 response is received from the Content Switching vServer.
The relevant configuration is as follows:

How will the administrator correct the issue?

• A. Unbind CS_POL_2
• B. Unbind CS_POL_1
• C. Bind Policy Unbind CS_POL_2 with priority 90
• D. Bind Policy Unbind CS_POL_3 with priority 90

Answer: C

NEW QUESTION 16
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once.
What upgrading flexibility does SDX provide in this scenario?

• A. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
• B. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
• C. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
• D. The NetScaler instances have to be upgraded at the same time.

Answer: D

NEW QUESTION 17
How does the NetScaler communicate that IP-to-MAC address bindings have changed to the switches and routers on the network, when a NetScaler high availability (HA) pair failover occurs?

• A. The NetScaler uses Gratuitous ARPs (GARPs) to update the devices on the network.
• B. The NetScaler uses MAC-based Forwarding to update the routers.
• C. The NetScaler uses Proxy ARP to update the devices on the network.
• D. The NetScaler uses Reverse ARP (RARP) to update the devices on the network.

Answer: B