Super ways to testking ccna 200-120

Cisco certification is sought after there occupation. Loop involving Cisco certification can use pertaining to position everywhere in the entire world. Cisco certification will be the label involving ensure. A competent might enrich his/her functionality that will readily strengthen his/her information as well as know-how together with Cisco. Suppliers are seeking all those employees whore very well credentialed and still have further ordinary knowledge as well as expertise on their niche.

2021 Aug testout ccna 200-120:

Q161. - (Topic 2) 

Refer to the exhibit. 

The network administrator normally establishes a Telnet session with the switch from host 

A. However, host A is unavailable. The administrator's attempt to telnet to the switch from host B fails, but pings to the other two hosts are successful. What is the issue? 

A. Host B and the switch need to be in the same subnet. 

B. The switch interface connected to the router is down. 

C. Host B needs to be assigned an IP address in VLAN 1. 

D. The switch needs an appropriate default gateway assigned. 

E. The switch interfaces need the appropriate IP addresses assigned. 

Answer: D 

Q162. - (Topic 3) 

Refer to the exhibit. 

What is the most efficient summarization that R1 can use to advertise its networks to R2? 

A. 172.1.0.0/22 

B. 172.1.0.0/21 

C. 172.1.4.0/22 

D. 172.1.4.0/24 172.1.5.0/24 172.1.6.0/24 172.1.7.0/24 

E. 172.1.4.0/25 172.1.4.128/25 172.1.5.0/24 172.1.6.0/24 172.1.7.0/24 

Answer: C 

Q163. CORRECT TEXT - (Topic 9) 

A corporation wants to add security to its network. The requirements are: 

. Host C should be able to use a web browser (HTTP) to access the Finance Web Server. . Other types of access from host C to the Finance Web Server should be blocked. . All access from hosts in the Core or local LAN to the Finance Web Server should be blocked. . All hosts in the Core and on local LAN should be able to access the Public Web Server. 

You have been tasked to create and apply a numbered access list to a single outbound interface. This access list can contain no more than three statements that meet these requirements. 

Access to the router CLI can be gained by clicking on the appropriate host. 

All passwords have been temporarily set to “cisco”. 

The Core connection uses an IP address of 198.18.209.65. 

The computers in the Hosts LAN have been assigned addresses of 192.168.78.1 – 

192.168.78.254. host A 192.168.78.1 host B 192.168.78.2 host C 192.168.78.3 host D 192.168.78.4 The Finance Web Server has been assigned an address of 172.22.146.17. The Public Web Server in the Server LAN has been assigned an address of 

172.22.146.18. 

Answer: Please see below explanation part for details answer steps: 

Q164. - (Topic 7) 

Scenario 

Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial 

links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and 

SW2 are also connected to the routers R4 and R5. 

The EIGRP routing protocol is configured. 

You are required to troubleshoot and resolve the EIGRP issues between the various 

routers. 

Use the appropriate show commands to troubleshoot the issues. 

Router R6 does not form an EIGRP neighbor relationship correctly with router R1. What is the cause for this misconfiguration? 

A. The K values mismatch. 

B. The AS does not match. 

C. The network command is missing. 

D. The passive-interface command is enabled. 

Answer: C 

Q165. - (Topic 6) 

Which item represents the standard IP ACL? 

A. access-list 110 permit ip any any 

B. access-list 50 deny 192.168.1.1 0.0.0.255 

C. access list 101 deny tcp any host 192.168.1.1 

D. access-list 2500 deny tcp any host 192.168.1.1 eq 22 

Answer: B 

Up to date test 200-120:

Q166. - (Topic 9) 

If a router has four interfaces and each interface is connected to four switches, how many broadcast domains are present on the router? 

A. 1 

B. 2 

C. 4 

D. 8 

Answer: C 

Q167. - (Topic 9) 

Which step in the router boot process searches for an IOS image to load into the router? 

A. bootstrap 

B. POST 

C. mini-IOS 

D. ROMMON mode 

Answer: A 

Q168. - (Topic 5) 

What authentication type is used by SNMPv2? 

A. HMAC-MD5 

B. HMAC-SHA 

C. CBC-DES 

D. community strings 

Answer: D 

Q169. - (Topic 6) 

Which set of commands is recommended to prevent the use of a hub in the access layer? 

A. switch(config-if)#switchport mode trunk switch(config-if)#switchport port-security maximum 1 

B. switch(config-if)#switchport mode trunk switch(config-if)#switchport port-security mac-address 1 

C. switch(config-if)#switchport mode access switch(config-if)#switchport port-security maximum 1 

D. switch(config-if)#switchport mode access switch(config-if)#switchport port-security mac-address 1 

Answer: C 

Q170. - (Topic 4) 

What is a global command? 

A. a command that is set once and affects the entire router 

B. a command that is implemented in all foreign and domestic IOS versions 

C. a command that is universal in application and supports all protocols 

D. a command that is available in every release of IOS, regardless of the version or deployment status 

E. a command that can be entered in any configuration mode 

Answer: A