200-125 Guide

200-125 Exam Royal Pack (In Stock.)

 
  • Cisco
  • Exam Number/Code 200-125
  • Product Name CCNA Cisco Certified Network Associate CCNA (v3.0)
  • Questions and Answers
  • 841 Q&As
  • Last Updated
  • Dec 02,2017
  • List Price
  • $128.99
  • Price
  • Today 59.99 USD

Free TrialVersion: demo Buy Now 50% OFF

What Most up-to-date 200-125 Is?

Once you acquire our 200-125 exam dumps, you are going to receive the practice questions as well as answers in two forms. One is printable Pdf format along with the other is downloadable Test Motor format. Absolutely no other internet site can provide your high standard involving accuracy and good quality of Cisco Cisco exam questions as well as answers. You will find every one of the necessary understanding points regarding the 200-125 exam in the Cisco Cisco practice braindumps. You are going to go beyond your passing score after using our Cisco online training check. You can require a practice test just before buy the Cisco Cisco products. Therefore you can pay more attention for the weak points within later study. Using the 200-125 dumps study guide may make your preparation easier.

2016 Sep 200-125 practice exam

Q211. - (Topic 4) 

On a corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs? 

A. a router with subinterfaces configured on the physical interface that is connected to the switch 

B. a router with an IP address on the physical interface connected to the switch 

C. a switch with an access link that is configured between the switches 

D. a switch with a trunk link that is configured between the switches 

Answer: A 


Q212. - (Topic 8) 

Refer to the exhibit. 


In the Frame Relay network, which IP addresses would be assigned to the interfaces with point-to-point PVCs? 

A. DLCI 16: 192.168.10.1 /24 

DLCI 17: 192.168.10.1 /24 

DLCI 99: 192.168.10.2 /24 

DLCI 28: 192.168.10.3 /24 

B. DLCI 16: 192.168.10.1 /24 

DLCI 17: 192.168.11.1 /24 

DLCI 99: 192.168.12.1 /24 

DLCI 28: 192.168.13.1 /24 

C. DLCI 16: 192.168.10.1 /24 

DLCI 17: 192.168.11.1 /24 

DLCI 99: 192.168.10.2 /24 

DLCI 28: 192.168.11.2 /24 

D. DLCI 16: 192.168.10.1 /24 

DLCI 17: 192.168.10.2 /24 

DLCI 99: 192.168.10.3 /24 

DLCI 28: 192.168.10.4 /24 

Answer: C 


Q213. DRAG DROP - (Topic 1) 


Answer: 



Q214. - (Topic 3) 

What is the first 24 bits in a MAC address called? 

A. NIC 

B. BIA 

C. OUI 

D. VAI 

Answer: C 


Q215. - (Topic 5) 

A network engineer wants to allow a temporary entry for a remote user with a specific username and password so that the user can access the entire network over the Internet. Which ACL can be used? 

A. standard 

B. extended 

C. dynamic 

D. reflexive 

Answer: C 


200-125 training

Latest 200-125 exam prep:

Q216. - (Topic 4) 

Which statements describe the routing protocol OSPF? (Choose three.) 

A. It supports VLSM. 

B. It is used to route between autonomous systems. 

C. It confines network instability to one area of the network. 

D. It increases routing overhead on the network. 

E. It allows extensive control of routing updates. 

F. It is simpler to configure than RIP v2. 

Answer: A,C,E 


Q217. - (Topic 4) 

What information does a router running a link-state protocol use to build and maintain its topological database? (Choose two.) 

A. hello packets 

B. SAP messages sent by other routers 

C. LSAs from other routers 

D. beacons received on point-to-point links 

E. routing tables received from other link-state routers 

F. TTL packets from designated routers 

Answer: A,C 


Q218. - (Topic 8) 

A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router. How should the network administrator configure the serial interface of the main office router to make the connection? 

A. Main(config)# interface serial 0/0 

Main(config-if)# ip address 172.16.1.1 255.255.255.252 

Main(config-if)# no shut 

B. Main(config)# interface serial 0/0 

Main(config-if)# ip address 172.16.1.1 255.255.255.252 

Main(config-if)# encapsulation ppp 

Main(config-if)# no shut 

C. Main(config)# interface serial 0/0 

Main(config-if)# ip address 172.16.1.1 255.255.255.252 

Main(config-if)# encapsulation frame-relay 

Main(config-if)# authentication chap 

Main(config-if)# no shut 

D. Main(config)# interface serial 0/0 

Main(config-if)#ip address 172.16.1.1 255.255.255.252 

Main(config-if)#encapsulation ietf 

Main(config-if)# no shut 

Answer: B 


Q219. - (Topic 2) 

What value is primarily used to determine which port becomes the root port on each nonroot switch in a spanning-tree topology? 

A. path cost 

B. lowest port MAC address 

C. VTP revision number 

D. highest port priority number 

E. port priority number and MAC address 

Answer: A 


Q220. - (Topic 4) 

Which type of EIGRP route entry describes a feasible successor? 

A. a backup route, stored in the routing table 

B. a primary route, stored in the routing table 

C. a backup route, stored in the topology table 

D. a primary route, stored in the topology table 

Answer: C 


To know more about the 200-125, click here.

Tagged as : Cisco 200-125 Dumps, Download 200-125 pdf, 200-125 VCE, 200-125 pass4sure, examcollection 200-125