Cisco 200-355 study manual, Pdf exam demos and test engine is going to be available at Examcollection whenever you pay for your fees. Fast access to our Cisco Cisco exam items will be offered for you to download on your PC. This is the quickest and shortest way for you to prepare for your actual Cisco exam. Examcollection?¡¥s Cisco 200-355 exam dumps save a person a lot of moment and money. You can throw aside the prolonged books. Carry the Cisco 200-355 printable Pdf demos using you to assessment the theoretical information and practice the simulated test in your PC with our test powerplant. Make records on the problems every moment and spare more efforts on the weak aspects in your later preparation until finally you master all the key items of the Cisco Cisco exam.
Q41. How many RADIUS servers can be configured globally and per WLAN on a Cisco WLC version 7.0?
A. 7 global; additional 1 per WLAN
B. 7 global; additional 3 per WLAN
C. 17 global; additional 1 per WLAN
D. 17 global; additional 3 per WLAN
E. 7 global; reuse of up to 1 maximum per WLAN
F. 17 global; reuse of up to 1 maximum per WLAN
G. 17 global; reuse of up to 3 maximum per WLAN
Answer: G
Q42. Which statement about an infrastructure basic service set is true according to IEEE 802.11 specifications?
A. The set also is called an ad hoc network.
B. The BSSID is generated from the first wireless client that starts up in the IBSS.
C. The set enables the use of ESS.
D. No signals are relayed from one client to another client.
Answer: C
Q43. An engineer is trying to convert the IP Address of the wireless controller to amend DHCP Option 43 configuration on the DHCP server. What mathematical format must the IP address of the Wireless controller be converted to in order to function correctly?
A. Hexadecimal
B. Binary
C. Decimal
D. ASCII
Answer: A
Q44. Which calculation computes the EIRP of an antenna?
A. EIRP = Tx power (dBm) + Antenna Gain (dBi) - Cable Loss (dB)
B. EIRP= Cable Loss (dB)+ Antenna Gain (dBi) - Tx power (dBm)
C. EIRP = Cable Loss (dB)+ Antenna Gain (dBi) / Tx power (dBm)
D. EIRP = Tx power (dBm) + Antenna Gain (dBi) / Cable Loss (dB)
E. EIRP = Antenna Gain (dBi) - Cable Loss (dB) * Tx power (dBm)
F. EIRP = Tx power (dBm) * Antenna Gain (dBi) / Cable Loss (dB)
Answer: A
Q45. You have a lightweight AP that has been moved to a new subnet and has become stranded because DNS and DHCP servers are unavailable. The AP cannot connect to the controller.
When connected to the console port, which three minimum parameters must you configure? (Choose three.)
A. AP IP address
B. controller name
C. AP hostname
D. default gateway IP address
E. controller IP address
F. username and password
Answer: A,D,E
Q46. When a wireless guest network is implemented using auto-anchor mobility in a controller-based wireless network, which controller is responsible for a guest client's IP address and their security configuration?
A. any controller that supports the same VLAN
B. foreign controller
C. anchor controller
D. master controller
E. RF group master controller
Answer: C
Q47. Which statement describes spread spectrum technology in wireless communications?
A. Signal is spread across optical pulses.
B. Signal is spread across variations of amplitudes.
C. Signal is spread across one frequency.
D. Signal is spread across a whole band of frequencies.
Answer: D
Q48. A network engineer in the GUI of WCS version 7 wants to add an access point to a map. Where can this command be found within the drop-down menu?
A. Monitor > Maps
B. Reports > Maps
C. Monitor > Network Summary
D. Configure > Maps
Answer: A
Q49. The wireless network is using controller-based APs and version 7.0 MR1. The APs appear to be connected properly to the controllers. A wireless user near one of the APs reports that they are unable to connect to the network with their pre-shared key.
Which option shows the GUI path where you can check the connection status of that client?
A. WLANs > WLAN_ID > Advanced
B. Security > Clients
C. Security > Advanced > Clients
D. Monitor > Clients
E. Wireless > 802.11b/g/n > clients
Answer: D
Q50. A wireless bridge is being installed near an airport. An organization informs the city council about complying with max power levels that could be used and settings on any 5GHz channels used that might interfere with the airport radar. What organization is this?
A. Institute of Electrical and Electronics Engineers
B. Internet Engineering Task Force
C. Federal Communications Commission
D. Wireless Fidelity Alliance
Answer: C
To know more about the 200-355, click here.