300-180 Guide
Renew 300-180 Rapidshare 2021
Posted by Alex Baker to Cisco 300-180
Follow @2passeasy
Cause all that matters here is passing the Cisco 300-180 exam. Cause all that you need is a high score of 300-180 DCIT Troubleshooting Cisco Data Center Infrastructure (DCIT) exam. The only one thing you need to do is downloading Exambible 300-180 exam study guides now. We will not let you down with our money-back guarantee.
NEW QUESTION 1
Which command displays the traffic statistics for a port channel interface?
- A. show interface port-channel channel-number
- B. show port-channel traffic
- C. show port-channel usage
- D. show port-channel compatibility-parameters
Answer: B
NEW QUESTION 2
You see incoming updates in the logs from the hypervisor. But the State Of the Cisco APIC fails to change
Which option is a possible cause Of the issue?
- A. VMM is not integrated properly
- B. The APIC is in a minority state
- C. No uplinks are configured on the Cisco AVS.
- D. The VMM credentials are incorrect.
Answer: D
NEW QUESTION 3
Which three statements are true regarding trunking on an ISL between two switches in order for the VSAN to be trunked? (Choose three.)
- A. The VSAN must be defined on both switches.
- B. The VSAN must be on the VSAN allowed list.
- C. All VSANs that are being trunked must be using either enhanced or non-enhanced mode zoning, but not both.
- D. IVR must be configured for Cisco Fabric Services.
- E. The device alias database must successfully merge.
- F. There cannot be any duplicate domain IDs within an individual VSAN.
Answer: ABF
NEW QUESTION 4
Which two commands will help an administrator identify any issues with an In-Service Software Upgrade? (Choose two.)
- A. show cts interface
- B. show incompatibility system
- C. show license file
- D. show install impact all
- E. show install issu-failure
Answer: BD
NEW QUESTION 5
Which statement is true regarding Cisco FabricPath?
- A. It is necessary to first install the Cisco FabricPath feature set in the default VDC.
- B. Cisco FabricPath is only available on Cisco Nexus 7010 Switches with the Supervisor 2 engine.
- C. Cisco FabricPath cannot be disabled explicitly for a specific VDC.
- D. If the Cisco FabricPath feature is not installed, the fabricpath keyword will be available in the feature-set command.
Answer: A
NEW QUESTION 6
Refer to the exhibit.
A user named user1 is unable to create roles. What must you do to resolve the issue?
- A. Assign user1 to the network-admin role.
- B. Assign user1 to the tech-admin role only.
- C. Set the user password for user1
- D. Allow user1 to log in locally
Answer: A
NEW QUESTION 7
Refer to exhibit.
Customer has a pair of Cisco Nexus7010s switches and connected to a single Cisco Nexus5548 switch via vPC. Customer has a combination of M1 and F1 I/O Modules in Cisco Nexus7010s.
Why is the design described not supported?
- A. Mixing I/O Modules on the Same Side of a Peer Link is not supported
- B. vPC does not support split control plane
- C. You can not configure a vPC peer link to configure two devices as vPCs
- D. Need to add another Cisco Nexus5548 switch to the topology to make this work.
Answer: A
NEW QUESTION 8
When you look at the HSRP state for devices on a VLAN that is extended by OTV, you see the following states: Active, Standby, and Listen. However, you intended each data center device to show the state as Active and Standby. What is the problem?
- A. HSRP is not configured correctly.
- B. A VACL is missing.
- C. A PACL is missing.
- D. This cannot be done.
Answer: A
NEW QUESTION 9
Refer to the exhibit.
Which two connectivity options for interfaces Ethernet 7/24-32 are valid?
- A. FCoE interfaces that are shared among other VDCs
- B. FCoE interfaces that connect to a storage array
- C. Fibre Channel interfaces that connect to a storage array
- D. Fibre Channel interfaces that are shared among other VDCs
- E. FCoE interfaces that connect to a server
Answer: BE
NEW QUESTION 10
Refer to the exhibit.
Which action removes the system designation from VLAN 70?
- A. Create another port profile that excludes VLAN 70
- B. Shut down the port profile first
- C. Delete the uplink-storage port profile, and then receive it
- D. Remove VLAN 70 from the trunk first
Answer: A
NEW QUESTION 11
Refer to the output. feature otv
otv site-vlan 2
otv site-identifier 256
!
interface ethernet 2/0
ip address 192.0.2.1/24 ip igmp version 3
!
interface ethernet 2/1 ip address 192.0.2.2/24 ip igmp version 3
!
interface Overlay1
otv control-group 239.1.1.1 otv join-interface ethernet 2/0 otv extend-vlan 3-100
!
interface Overlay2
otv control-group 239.1.1.1 otv join-interface ethernet 2/1 otv extend-vlan 101-115
Which command best represents where the control plane configurations are applied?
- A. switch(config-if-overlay)# otv isis hello-interval 30
- B. switch(config-if)# otv isis hello-interval 30
- C. switch(config-vlan)# otv isis hello-interval 30
- D. switch(config)# otv isis hello-interval 30
Answer: A
NEW QUESTION 12
In an IP storage environment, what occurs if you apply a service profile to a server that has an Ethernet-only mezzanine card?
- A. The storage adapter is not visible to the OS
- B. A blade association occurs,
- C. WWPN and WWNN are selected from the default pool
- D. The OS fails to boot
Answer: B
NEW QUESTION 13
Refer to the exhibit. After a boot policy is added, the profile stops working, which option is a possible cause of the issue?
- A. An iSCSI adapter is being on top of the vNIC
- B. Both of the adapters from the fabric A and fabric B must be specified
- C. The name of the adapter is incorrect
- D. The boot target does not exist
Answer: A
NEW QUESTION 14
Which solution can be applied if there is communication between hosts in different VLANs over Cisco OTV and the hosts are losing connectivity?
- A. Configure an EFM script to clear MAC CAM tables on all deuces every 25 minutes.
- B. Increase the Cisco OTV CAM timers to match the ARP timer on any non-Nexus switches.
- C. Move hosts so that they belong to the same VLAN,
- D. Configure me ARP timers of any non-Nexus switches to be less than the Cisco OTV CAM timer.
Answer: D
NEW QUESTION 15
After moving Cisco UCS to a new data center that has a different management IP network, you discover that the KVM Stops working. What is a possible cause of the issue?
- A. The management IP block uses the same subnet as the management port ot the UCSM.
- B. The management IP block uses a different subnet than the management port of the UCSM.
- C. The management IP block is not cleared,
- D. The management IP block is not defined.
Answer: B
NEW QUESTION 16
Refer to the exhibit.
A customer is having problems with NPV. Which of these is the cause of the problem?
- A. No server was requested or received by the FLOGI database.
- B. One external link must be up for server interface to be up.
- C. Internal links are down and must be up for the server interface to be up.
- D. VSANs are misconfigured on the upstream ports.
- E. VLANs are misconfigured on the upstream ports.
Answer: D
NEW QUESTION 17
Which option is exchanged between neighbors during OTV adjacency formation across the Layer 3 multicast network?
- A. IGMP packets
- B. OTV open messages
- C. L1 IS-IS Hello packets
- D. OTV adjacency packets
Answer: B
NEW QUESTION 18
Refer to the exhibit. Anycast RP fails. Which two actions do you perform to resolve the issue? (Choose two.)
- A. Configure the IP address of Anycast RP to use the multicast range.
- B. Change the loopback2 interface on Nexus 2 to 10.1.1.1/32.
- C. Change the pim rp-address on Nexus 2 to 10.1.1.1.
- D. Add the pim ssm range to Nexus 1.
- E. Set the pim ssm range on Nexus 2 to 225.0.0.0/24
Answer: BC
NEW QUESTION 19
Refer to the exhibit. You discover that eth1/1 stopped forwarding data. Which option describes how to resolve the issue?
- A. Reboot the switch.
- B. On the adjacent switch, run the spanning-tree port type network command.
- C. On the switch, change the STP type.
- D. On the adjacent switch, disable bridge assurance.
Answer: B
NEW QUESTION 20
ACisco Nexus 7010 Switch that is at the core of a customer network has high CPU utilization. What can the customer do to prevent a network outage and identify why CPU utilization is high?
- A. apply a rate limit on the interfaces with high traffic
- B. use CoPP
- C. use HSRP and vPC for redundancy to handle high CPU utilization
- D. use the show process cpu command to see the high CPU utilization
Answer: B
NEW QUESTION 21
Refer to the exhibit.
The VXLAN configuration fails. Which action do you take to resolve the issue?
- A. Change the multicast address in the 232.0.0.0/8 range.
- B. Change the mask of loopback1 to 255.255.255.255.
- C. Use a transit interface as the source interface.
- D. Enable dense mode on loopback1.
Answer: B
NEW QUESTION 22
Refer to the exhibit.
What command should you execute next in resolving a lock failure?
- A. ntp execute
- B. ntp commit
- C. ntp lock
- D. ntp help
- E. ntp detail
Answer: B
NEW QUESTION 23
On a Cisco Nexus 5500 Series Switch, the VFC is stuck in the initializing state. Which QoS statements must be configured for FCoE to operate?
- A. system qosservice-policy type qos input fcoe-default-in-policy service-policy type queuing input fcoe-default-in-policy service-policy type queuing output fcoe-default-out-policy service-policy type network-qos fcoe-default-nq-policy
- B. system qosservice-policy type qos input fcoe-default-in-policy service-policy type queuing input fcoe-default-in-policy service-policy type qos input default-in-policyservice-policy type network-qos default-nq-policy
- C. system qosservice-policy type qos input default-in-policy service-policy type queuing input default-in-policy service-policy type queuing output default-out-policy service-policy type network-qos default-nq-policy
- D. system qosservice-policy type qos input default-in-policy service-policy type queuing input default-in-policyservice-policy type queuing output fcoe-default-out-policy service-policy type network-qos fcoe-default-nq-policy
Answer: A
NEW QUESTION 24
From Cisco UCS Central, you plan to add two Cisco UCS domains that use the same name for the WWPN pool. What must you do to ensure a successful Integration?
- A. Rename the pools to have the same name.
- B. Assign WWPN pools to Different users.
- C. Move the WWPN pools to different organizations.
- D. Remove duplicate WWPN pools.
Answer: B
NEW QUESTION 25
A customer is configuring an upstream disjoint Layer 2 network in a Cisco UCS domain. So far they have configured the following:
Fabric Interconnects are in switching mode.
There is symmetrical configuration for high availability. There are no overlapping VLANs.
Each vNIC is communicating with one disjoint Layer 2 network.
After validating the above, the customer is still having issues with network connectivity. What is the issue?
- A. Overlapping VLANs are allowed in a disjoint Layer 2 network.
- B. The vNIC configuration is incorrect and must communicate with two or more disjoint layer 2 networks.
- C. The fabric interconnect must be in end-host mode for a disjoint Layer 2 network.
- D. Asymmetrical configuration for high availability needs to be configured.
Answer: C
NEW QUESTION 26
Refer to the exhibit.
You cannot create a layer 3 port channel interface on the Cisco nexus 7000 Series switch to aggregate two
links connected to the core switch. Which reason is the root cause of this problem?
- A. No unicast IPv4 rout memory resource are available.
- B. No port channel resources are available.
- C. No multicast IPv4 rout memory resources are available.
- D. Layer 3 port channel cannot be configured on Cisco Nexus 7000 Series switches, instead interface VLAN must configured and port channel must be mapped to it.
Answer: D
NEW QUESTION 27
You have upgraded your Cisco Nexus 7009 Switches and converted the default VDC to an admin VDC. You notice that all of the ACLs are still present on the admin VDC after the conversion. What should you do?
- A. enable configuration synchronization between the admin VDC and the production VDCs
- B. delete the ACLs
- C. delete all ACLs except those related to CoPP
- D. delete all ACLs except those bound to resource templates
- E. use the system admin-vdc acl command to properly migrate ACLs
Answer: B
NEW QUESTION 28
Refer to the exhibit.
DC-SWITCH 14 is a Cisco Nexus switch Port channel 1106 connects to a Cisco Nexus switch named DC-SWITCH10. Which cause of the I flag is likely?
- A. Port channel 1106 is administratively down.
- B. STP is blocking port channel 1106
- C. LACP is misconfigured on DC-SWITCH14
- D. LACP is misconfigured on DC-SWITCH10.
Answer: C
NEW QUESTION 29
Which occurrence happens during an ISSU in a single supervisor configuration?
- A. The control plane is offline for up to 300 seconds
- B. NTP sessions stay alive and active.
- C. FLOGI/fdisc or logo requests from servers fail until the ISSU is complete.
- D. The time-to-live value tor CDP is increased (360 seconds) if it is less than the recommended timeout value.
Answer: C
NEW QUESTION 30
......
Recommend!! Get the Full 300-180 dumps in VCE and PDF From Passcertsure, Welcome to Download: https://www.passcertsure.com/300-180-test/ (New 269 Q&As Version)
To know more about the 300-180, click here.