What Approved 300-625 Samples Is

NEW QUESTION 1
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?

• A. auto topology
• B. transit VSANs
• C. IVR NAT
• D. virtual domains

Answer: C

NEW QUESTION 2
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?

• A. management server
• B. fabric controller
• C. name server
• D. time server

Answer: C

NEW QUESTION 3
A storage administrator is upgrading Cisco NX-OS on a Cisco MDS switch. The administrator performs an ISSU upgrade following the configuration guide. While the install is proceeding, the administrator connects a new server to the switch, which cannot access storage. The existing servers continue to operate properly through the switch. Why is the new server failing to connect?

• A. The fabric data plane resets as part of the upgrade process.
• B. The new server is unable to log in to the fabric to receive an FC-ID.
• C. The upgrade process disables any currently unused ports.
• D. The zoning database is locked during the upgrade process.

Answer: D

NEW QUESTION 4
A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric. Which condition must the administrator consider while configuring this feature?

• A. NTP must be configured on all devices or the configuration fails.
• B. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.
• C. All switches on the fabric must be configured for the same password.
• D. Enabling DH-CHAP protocol feature is unsupported on FCIP interfaces.

Answer: B

NEW QUESTION 5
DRAG DROP
Drag and drop the DCNM configuration tasks from the left onto the correct tools on the right.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

NEW QUESTION 6
Refer to the exhibits.


A storage network engineer activates a zoneset on MDS-A and verifies the successful activation (Exhibit 1). The engineer is then notified that there is a SAN outage (Exhibit 2) What is the cause of the outage?

• A. Another network engineer activated zoneset ZoneSetMDS-B-VSAN100 on MDS-A.
• B. Another network engineer issued the zone mode enhanced vsan 100 command on another switch in the fabric.
• C. Another network engineer activated the zoneset ZoneSetMDS-B-VSAN100 command on another switch in the fabric.
• D. Another network engineer issued the zone default-zone permit vsan 100 command on another switch in the fabric.

Answer: D

NEW QUESTION 7
Refer to the exhibit.

A port channel has been configured between a Cisco MDS and a Cisco Fabric Interconnect switch. Which interface(s) in the port channel carry the control plane traffic?

• A. per packet, balanced between interfaces fc1/9 and fc1/10
• B. from interface fc1/9
• C. from interface fc1/10
• D. per flow, balanced between interfaces fc1/9 and fc1/10

Answer: D

NEW QUESTION 8
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user. Which argument does the engineer use to clear the lock from the zoning database configuration?

• A. commit
• B. abort
• C. clear
• D. force

Answer: C

NEW QUESTION 9
A storage network engineer is implementing SAN telemetry for a SAN infrastructure using Cisco DCNM for SAN. Which command is used to check the session status for telemetry operation?

• A. show telemetry pipeline stats
• B. show telemetry transport
• C. show telemetry control stats
• D. show analytics system-load

Answer: B

NEW QUESTION 10
Which configuration is available only in Cisco DCNM-SAN Advanced mode?

• A. IVR
• B. VMpath configuration
• C. zoning
• D. template-based provisioning

Answer: A

NEW QUESTION 11
A storage engineer is troubleshooting a Cisco MDS switch upgrade issue. What prevents the completion of a non- disruptive upgrade?

• A. The Fibre Channel host initiator is connected.
• B. The Fibre Channel storage target is connected.
• C. The Cisco Fabric Services operation in progress.
• D. The Fibre Channel and FCoE storage targets are connected.

Answer: B

NEW QUESTION 12
Refer to the exhibit.

Which configuration change improves the ability of the link to recover from frame loss?

• A. Increase the reset timeout.
• B. Enable selective acknowledgment.
• C. Increase the send buffer size to 15000 KB.
• D. Disable PMTU discovery.

Answer: B

NEW QUESTION 13
Which two components are required for successful MDS USB POAP (Choose two.)

• A. NTFS formatted USB drive
• B. USB drive in port 1
• C. script named poap_script pl
• D. ENTERPRISE_PKG license
• E. system and kickstart images

Answer: CE

NEW QUESTION 14
After user account attributes are modified in Cisco NX-OS, when do changes to the user’s session attributes take effect?

• A. immediately
• B. at the scheduled time
• C. when the user logs out of a session
• D. when the user creates a new session

Answer: D

NEW QUESTION 15
A storage network engineer is implementing disk-array data replication between two SAN environments in two different data centers not connected via Fibre Channel. Which SAN switch feature must be implemented?

• A. FCIP
• B. zoning merge over LAN
• C. VSAN scoping
• D. IVR

Answer: A

NEW QUESTION 16
Refer to the exhibit.

An engineer is configuring Inter-VSAN routing for two Cisco MDS switches. The FSPF cost between the switches is 500, and the Cisco MDS core virtualizes an IVR NAT domain as shown. Which statement about the topology is correct?

• A. The MDS-Core simulates an IVR NAT, and the FSPF cost is 500.
• B. The MDS-Core simulates an IVR NAT, and increases the cost to 501.
• C. The MDS-Core simulates an IVR NAT, and decreases the cost to 400.
• D. The MDS-Core simulates an IVR NAT, and increases the cost to 600.

Answer: B

NEW QUESTION 17
A storage administrator wants to enable NPV in a Fibre Channel edge switch. Which configuration is supported in this mode?

• A. Cisco Fabric Services distribution over Fibre Channel
• B. E Port connectivity to the core switch
• C. local switching of east-west traffic
• D. Dynamic Port VSAN Membership

Answer: A

NEW QUESTION 18
Which Cisco NX-OS command displays the VSAN that is associated with each FCID?

• A. show fcdomain
• B. show fc2 plogi
• C. show vsan database
• D. show flogi database

Answer: A

NEW QUESTION 19
Which benefit of upgrading to the Cisco DCNM server-based advanced feature license for a Cisco MDS switch is correct?

• A. The license can be reassigned when a switch is replaced with a newer version within the same product family.
• B. The license can be assigned to either server MAC address or switch serial number.
• C. An unlimited number of devices can be added to the list of licensed devices.
• D. The license can be reassigned when the switch is replaced with a Cisco Nexus switch.

Answer: A

NEW QUESTION 20
Which two protocols are used to implement SAN telemetry on Cisco MDS switches? (Choose two.)

• A. RPC transport
• B. GPB transport
• C. gRPC transport
• D. gRPC encoding
• E. GPB encoding

Answer: CE

NEW QUESTION 21
Refer to the exhibit.

Which command is used to determine which switch has the lock?

• A. show zoneset active
• B. show zone status
• C. show flogi database

Answer: C

NEW QUESTION 22
What does an unlicensed DCNM SAN fail to display?

• A. Fibre Channel, FCoE, and iSCSI topologies
• B. events and fault management
• C. historical performance monitoring
• D. real-time performance monitoring

Answer: C

NEW QUESTION 23
......