Beginners Guide: driver sitecom wl-352 v2 001

It is more faster and easier to pass the Cisco 352-001 exam by using Real Cisco CCDE Written Exam questuins and answers. Immediate access to the Far out 352-001 Exam and find the same core area 352-001 questions with professionally verified answers, then PASS your exam with a high score now.

2021 Dec actualtests 352-001:

Q61. Refer to the exhibit. 

How would you adjust the design to improve convergence on the network? 

A. Add an intra-POP link between routers 1A and 1B, and enable IP LFA FRR. 

B. Use an IP SLA between the end stations to detect path failures. 

C. Enable SSO-NSF on routers 1A and 1B. 

D. Use BGP to connect the sites over the WAN. 

Answer: A 

Q62. ACME Corporation is deploying a new HR application that requires the network infrastructure to monitor and react to certain conditions in the network. Which feature should be used to meet this design requirement? 

A. Cisco IOS Embedded Event Manager 

B. IP SLA 

C. reflexive ACLs 

D. route maps 

E. SOAP 

F. exit status 

Answer: A 

Q63. You are creating a network design that will influence the traffic path across the MPLS core on a virtual private LAN. Which parameter is included in your design to manage the traffic? 

A. Deploy MPLS traffic engineering and modify the path using the preferred path. 

B. Deploy MPLS traffic engineering and modify the path using auto-route, static routing, or PBR. 

C. Create an MPLS traffic engineering tunnel and modify the path using a static route. 

D. Create an MPLS traffic engineering tunnel and modify the path using auto-route announce. 

Answer: A 

Q64. You are designing the QoS features for a large enterprise network that includes DMVPN. When would you need to configure QoS preclassify? 

A. when you are marking packets with the DSCP bits 

B. when you are marking packets with the TOS bits 

C. when your service provider requires the DSCP bits be set 

D. when the QoS policy cannot be based on DSCP ToS bits 

Answer: D 

Q65. When creating a network design that routes an IGP over L2VPNs, with which device does the remote CE router form an IGP adjacency? 

A. the hub site PE router 

B. the hub site CE router 

C. the directly connected PE router 

D. The IGP will not establish adjacency over the MPLS network. 

Answer: B 

Renewal sitecom wl-352 v1 001:

Q66. You are designing a network using multipoint GRE tunnels and need to be able to detect when connectivity between the GRE tunnel endpoints is broken. Which statement is true about configuring keepalives for multipoint GRE tunnels? 

A. The keepalive timer values on the routers must have the same value. 

B. Both routers must support GRE tunnel keepalives. 

C. No configuration is required to detect when connectivity is broken between the GRE tunnel endpoints. 

D. GRE tunnel keepalives will not detect when connectivity is broken between the GRE tunnel endpoints. 

Answer: D 

Q67. Refer to the exhibit. 

Your company designed a network to allow server VLANs in a data center to span all access switches. In the design, Layer 3 VLAN interfaces and HSRP are configured on the aggregation switches. In which three ways should the design of the STP domain be optimized for server and application performance? (Choose three.) 

A. Use loop guard on access ports. 

B. Use PortFast on access ports. 

C. Use root guard on access ports. 

D. Align Layer 2 and Layer 3 forwarding paths. 

E. Use BPDU Skew Detection on access ports. 

F. Explicitly determine root and backup root bridges. 

Answer: BDF 

Q68. Tesla Radio GmbH is going to build a new research lab network based on a set of switches that would connect to their existing enterprise network. They are considering a design that would guarantee loop-free behavior within the set of switches. The design would also allow the group of switches to seem like a single switch to the enterprise network, because it is owned by a separate administrative group. Which Spanning Tree Protocol should be used to support the design requirements? 

A. IEEE 802.1w 

B. IEEE 802.1D 

C. IEEE 802.1s 

D. IEEE 802.1p 

Answer: C 

Q69. The Service Provider you work for wants to deploy CoS functionality on the P routers of the MPLS core, to provide a complete CoS solution to all customers that purchase services such as dedicated Internet access, MPLS Layer 3 VPN, and Layer 2 VPN (pseudowire). The design requirements are: 

. The network supports four service queues with equal treatment for delay, jitter, 

and packet loss. 

. Queues are numbered 0–3, where 0 is the default queue. 

. Three queues have one treatment, whereas the other queue has either one or two 

treatments. 

. The Service Provider manages control traffic, whereas the customers manage 

business critical and best effort. 

Which two statements could you recommend to allow for the appropriate level of bandwidth allocation? (Choose two.) 

A. Control plane 10%, Real Time 30%, Business Critical 40%, Best Effort 20% 

B. Control plane 80%. Real Time 10%, Business Critical 5%, Best Effort 5% 

C. Control plane 90%, Real Time 5%, Business Critical 5%, Best Effort 0% 

D. Control plane 20%, Real Time 40%, Business Critical 30%, Best Effort 10% 

Answer: AD 

Q70. Which multicast technology provides a large, many-to-many connectivity for a new application while minimizing load on the existing network infrastructure? 

A. Bidirectional PIM 

B. PIM Sparse Mode 

C. Any-source Multicast 

D. Source Specific Multicast 

Answer: A