Most recent 352-001: Actualtests real software from 131 to 140

Our pass rate is high to 98.9% and the similarity percentage between our 352-001 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 352-001 exam in just one try? I am currently studying for the Cisco 352-001 exam. Latest Cisco 352-001 Test exam practice questions and answers, Try Cisco 352-001 Brain Dumps First.

Q131. You have been tasked with designing a data center interconnect to provide business continuity. You want to encrypt the traffic over the DCI using IEEE 802.1AE MACsec to prevent the deployment of any firewall or IPS. Which two interconnect technologies support MACsec? (Choose two.) 

A. EoMPLS 

B. MPLS Layer 3 VPN 

C. DMVPN 

D. OTV 

E. VPLS 

F. GET VPN 

Answer: AE 

Q132. When creating a design plan for IPv6 integration, you decide to use stateless encapsulation of IPv6 packets into IPv4 tunnels between subscriber CPEs and a border relay. Which deployment technique allows for this functionality? 

A. 6rd 

B. Dual-Stack Lite 

C. 4rd 

D. DSTM 

Answer: A 

Q133. A company is planning to connect its 30 sites with a VPLS WAN backbone. A router at each site should establish neighborships with all other routers using the OSPF routing protocol. Which three points must be considered regarding DR and BDR when different router platforms are used? (Choose three.) 

A. It is a best practice that the routers with the most powerful hardware should take the role of the DR and BDR. 

B. If the IP OSPF priority is the same for all routers, the highest loopback IP address and router ID will decide which routers will take the DR and BDR role during the selection process. 

C. To select the DR and BDR, the IP OSPF priority must be set to a higher value than the default value at the DR and BDR during the selection process. 

D. To select the DR and BDR, the IP OSPF priority must be set to a lower value than the default value at the DR and BDR during the selection process. 

E. The role for the DR and BDR will be selected when a new OSPF router comes up. 

F. To force two routers to become a DR and a BDR, the IP OSPF priority can be set to zero at all other OSPF routers. 

Answer: ABF 

Q134. ACME Corporation is integrating IPv6 into their network, which relies heavily on multicast distribution of data. Which two IPv6 integration technologies support IPv6 multicast? (Choose two.) 

A. 6VPE 

B. 6PE 

C. dual stack 

D. ISATAP 

E. 6to4 

F. IPv6INIP 

Answer: CF 

Q135. In an OSPF network, users in a particular OSPF non-backbone area are complaining about slow access speeds to a shared corporate resource in another OSPF area. Traceroutes show that theusers are taking a suboptimal default route to the destinations. Which solution will improve access speed? 

A. Make the area totally stubby so that the default can be followed along the best path. 

B. Create a virtual link between the areas so that traffic can shortcut directly between them. 

C. Implement policy routing to channel the traffic in the optimal direction. 

D. Leak specific summaries on the ABRs for the remote subnets in addition to the default. 

Answer: D 

Q136. A network design includes a long signaling delay in notifying the Layer 3 control plane that an interface has failed. Which two of these actions would reduce that delay? (Choose two.) 

A. Enable lower data link layer recovery systems to have an opportunity to restore the interface. 

B. Increase the notification of interface flaps. 

C. Reduce the time for the network to reconverge. 

D. Increase network stability. 

Answer: AD 

Q137. Network designers plan to interconnect two geographically separated data centers using an Ethernet-over-MPLS pseudowire. Within that design, the link between the sites is stable, there are no apparent loops in the topology, and the root bridges for the respective VLANs are stable and unchanging. What additional aspect of the design should be adjusted to mitigate the chance of connectivity issues to the peer data center when the connection takes place? 

A. Enable 802.1d on one data center, and 802.1w on the other. 

B. Ensure that the spanning tree diameter for one or more VLANs is not too large. 

C. Enable UDLD on the link between the data centers. 

D. Enable root guard on the link between the data centers. 

Answer: B 

Q138. Service provider XYZ plans to provide dedicated Internet access and MPLS L3VPN services to business customers. XYZ has these design specifications: 

.  MP-BGP running on the core MPLS P routers with external Internet routes. 

. The core network will include 16 Point of Presence IP POPs throughout the Asia-Pacific region. . An additional nine non-P routers will use EBGP peering with multiple providers for Internet traffic. . An additional 50 PE routers will provide end customers with dedicated Internet access and L3VPN services throughout the Asia-Pacific region. 

In what two ways can the MP-BGP be removed from the MPLS P core routers and still provide dedicated Internet access and MPLS L3VPN services? (Choose two.) 

A. Disable BGP from the MPLS core P routers and have the MPLS core P routers run OSPF and LDP. 

B. Enable separate BGP control plane routers using a route reflector server concept that will be fully meshed with peer route reflector servers and have clients as MPLS PE routers and EBGP peering routers. 

C. Enable all EBGP routers as route reflector servers and MPLS PE routers as their clients. 

D. It is not possible to disable BGP from the MPLS core P routers without impacting the dedicated Internet access and MPLS L3VPN services. 

Answer: BC 

Q139. Which three techniques can be used to improve fault isolation in an enterprise network design? (Choose three.) 

A. aggregate routing information on an OSPF ABR 

B. fully meshed distribution layer 

C. Equal-Cost Multipath routing 

D. EIGRP query boundaries 

E. multiple IS-IS flooding domains 

F. tuned Spanning Tree Protocol timers 

Answer: ADE 

Q140. After the recent implementation of a new design that incorporated GRE tunnels into the network, the network operations staff is seeing the following syslog message in multiple routers on the network - %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing. 

From a design perspective, what was not taken into account prior to implementing the solution? 

A. The neighboring routers cannot respond within the specified hold time. 

B. The interface on the router that is the source of the tunnel is down. 

C. The interface on the neighboring router that is the source of the tunnel is down. 

D. The router is learning the route to the tunnel destination address using the tunnel interface. 

E. The tunnel interface on the router is not receiving any keepalives within the specified hold time. 

Answer: D