Our pass rate is high to 98.9% and the similarity percentage between our exam 70 412 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft exam 70 412 exam in just one try? I am currently studying for the Microsoft 70 412 pdf exam. Latest Microsoft 70 412 dumps Test exam practice questions and answers, Try Microsoft microsoft 70 412 Brain Dumps First.
Q121. Your network contains one Active Directory forest named contoso.com. The forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.
You need to ensure that all Active Directory changes are replicated to all of the domain controllers in the forest within 30 minutes.
What should you use?
Reference: Technet, Set-ADReplicationSite
Q122. You have a virtual machine named VM1 that runs on a host named Host1.
You configure VM1 to replicate to another host named Host2. Host2 is located in the same physical location as Host1.
You need to add an additional replica of VM1. The replica will be located in a different physical site.
What should you do?
A. From VM1 on Host2, click Extend Replication.
B. On Host1, configure the Hyper-V settings.
C. From VM1 on Host1, click Extend Replication.
D. On Host2, configure the Hyper-V settings.
Extend Replication through UI:
Before you Extend Replication to third site, you need to establish the replication between a primary server and replica server. Once that is done, go to replica site and from Hyper-V UI manager select the VM for which you want to extend the replication. Right click on VM and select “Replication->Extend Replication …”. This will open Extend Replication Wizard which is similar to Enable Replication Wizard.
NOTE: You configure a server to receive replication with Hyper-V Manager, in this situation the replica site is assumed to be the Replica Server. Therefore you extend replication from VM1 on Host2.
Note 2: With Hyper-V Extend Replication feature in Windows Server 2012 R2, customers can have multiple copies of data to protect them from different outage scenarios. For example, as a customer I might choose to keep my second DR site in the same campus or a few miles away while I want to keep my third copy of data across the continents to give added protection for my workloads. Hyper-V Replica Extend replication exactly addresses this problem by providing one more copy of workload at an extended site apart from replica site.
Reference: Hyper-V Replica: Extend Replication
Q123. You create a new virtual disk in a storage pool by using the New Virtual Disk Wizard. You discover that the new virtual disk has a write-back cache of 1 GB.
You need to ensure that the virtual disk has a write-back cache of 5 GB.
What should you do?
A. Detach the virtual disk, and then run the Resize-VirtualDisk cmdlet.
B. Detach the virtual disk, and then run the Set-VirtualDisk cmdlet.
C. Delete the virtual disk, and then run the New-StorageSubSystemVirtualDisk cmdlet.
D. Delete the virtual disk, and then run the New-VirtualDisk cmdlet.
So what about changing the cache size? Well, you can't modify the cache size, but you can specify it at the time that you create a new virtual hard disk. In order to do so, you have to use Windows PowerShell.
New-VirtualDisk –StoragePoolFriendlyName "<storage pool name>" –FriendlyName "<v
Reference: Using Windows Server 2012's SSD Write-Back Cache
Q124. You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run Windows Server 2012 R2.
You need to force every node in Cluster1 to contact immediately the Windows Server Update Services (WSUS) server on your network for updates.
Which tool should you use?
A. The Add-CauClusterRole cmdlet
B. The Wuauclt command
C. The Wusa command
D. The Invoke-CauScan cmdlet
The Add-CauClusterRole cmdlet adds the Cluster-Aware Updating (CAU) clustered role
that provides the self-updating functionality to the specified cluster. When the CAU
clustered role has been added to a cluster, the failover cluster can update itself on the
schedule that is specified by the user, without requiring an external computer to coordinate
the cluster updating process.
Not B. The wuauclt utility allows you some control over the functioning of the Windows
Update Agent. It is updated as part of Windows Update.
The following are the command line for wuauclt.
Initiates an asynchronous background search for applicable updates. If Automatic Updates
is disabled, this option has no effect.
Sends all queued reporting events to the server asynchronously.
/? /h /help
Shows this help information.
The Invoke-CauScan cmdlet performs a scan of cluster nodes for applicable updates and
returns a list of the initial set of updates that would be applied to each node in a specified
Note: The Invoke-CauRun cmdlet performs a scan of cluster nodes for applicable updates
and installs those updates via an Updating Run on the specified cluster.
Q125. DRAG DROP
Your network contains four servers that run Windows Server 2012 R2.
Each server has the Failover Clustering feature installed. Each server has three network
adapters installed. An iSCSI SAN is available on the network.
You create a failover cluster named Cluster1. You add the servers to the cluster.
You plan to configure the network settings of each server node as shown in the following table.
You need to configure the network settings for Cluster1.
What should you do?
To answer, drag the appropriate network communication setting to the correct cluster network. Each network communication setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Q126. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.
You add two additional nodes to Cluster1.
You have a folder named Folder1 on Server1 that contains Application data.
You plan to provide continuously available access to Folder1.
You need to ensure that all of the nodes in Cluster1 can actively respond to the client requests for Folder1.
What should you configure?
C. The cluster quorum settings
D. The failover settings
E. A file server for general use
F. The Handling priority
G. The host priority
H. Live migration
I. The possible owner
J. The preferred owner
K. Quick migration
L. The Scale-Out File Server
Scale-Out File Server is a feature that is designed to provide scale-out file shares that are continuously available for file-based server application storage. Scale-out file shares provides the ability to share the same folder from multiple nodes of the same cluster.
Note: You can deploy and configure a clustered file server by using either of the following methods:
* Scale-Out File Server for Application data (Scale-Out File Server)
* File Server for general use
Scale-Out File Server for Application data (Scale-Out File Server) This clustered file server is introduced in Windows Server 2012 R2 and lets you store server Application data, such as Hyper-V virtual machine files, on file shares, and obtain a similar level of reliability, availability, manageability, and high performance that you would expect from a storage area network. All file shares are online on all nodes simultaneously. File shares associated with this type of clustered file server are called scale-out file shares. This is sometimes referred to as active-active.
Reference: Scale-Out File Server for Application Data Overview
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the IP Address Management (IPAM) Server feature installed.
You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1 and Server2. You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2. To which group on Server2 should you add Tech1? To answer, select the appropriate group in the answer area.
Your company has a main office and a branch office. An Active Directory site exists for each office.
The network contains an Active Directory forest named contoso.com. The contoso.com domain contains three member servers named Server1, Server2, and Server3. All servers run Windows Server 2012 R2.
In the main office, you configure Server1 as a file server that uses BranchCache.
In the branch office, you configure Server2 and Server3 as BranchCache hosted cache servers.
You are creating a Group Policy for the branch office site.
Which two Group Policy settings should you configure?
To answer, select the appropriate two settings in the answer area.
Q129. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. DC1 has the DNS Server server role installed.
The network contains client computers that run either Linux, Windows 7, or Windows 8.
You have a standard primary zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)
You plan to configure Name Protection on all of the DHCP servers.
You need to configure the adatum.com zone to support Name Protection.
Which two configurations should you perform from DNS Manager? (Each correct answer presents part of the solution. Choose two.)
A. Sign the zone.
B. Store the zone in Active Directory.
C. Modify the Security settings of the zone.
D. Configure Dynamic updates.
E. Add a DNS key record
Name protection requires secure update to work. Without name protection DNS names may be hijacked.
You can use the following procedures to allow only secure dynamic updates for a zone.
Secure dynamic update is supported only for Active Directory–integrated zones. If the zone type is configured differently, you must change the zone type and directory-integrate the zone before securing it for Domain Name System (DNS) dynamic updates.
1. (B) Convert primary DNS server to Active Directory integrated primary
2. (D) Enable secure dynamic updates
Reference: DHCP: Secure DNS updates should be configured if Name Protection is enabled on any IPv4 scope
Q130. Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.
The domain contains a domain controller named DC1 that is configured as an enterprise root certification authority (CA).
All users in the domain are issued a smart card and are required to log on to their domain-joined client computer by using their smart card.
A user named User1 resigned and started to work for a competing company.
You need to prevent User1 immediately from logging on to any computer in the domain. The solution must not prevent other users from logging on to the domain.
Which tool should you use?
A. Active Directory Administrative Center
B. Certificate Templates
C. The Security Configuration Wizard
D. The Certificates snap-in
To disable or enable a user account using Active Directory Administrative Center
1. To open Active Directory Administrative Center, click Start , click Administrative Tools ,
and then click Active Directory Administrative Center .
To open Active Directory Users and Computers in Windows Server 2012, click Start , type
2. In the navigation pane, select the node that contains the user account whose status you
want to change.
3. In the management list, right-click the user whose status you want to change.
4. Depending on the status of the user account, do one of the following: . uk.co.certification.simulator.questionpool.PList@ed88a30
Reference: Disable or Enable a User Account
To know more about the 70-412, click here.