Oct 2021 updated: mcts 70-642

Certified of 70-642 exam prep materials and study guides for Microsoft certification for IT engineers, Real Success Guaranteed with Updated 70-642 pdf dumps vce Materials. 100% PASS TS: Windows Server 2008 Network Infrastructure, Configuring exam Today!

2021 Oct 70-642 in pdf:

Q121. - (Topic 2) 

Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 is located in a branch office. You discover that users cannot obtain cached documents from Server1. 

The BranchCache configuration on Server1 is shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that Server1 hosts cached content for client computers in the branch office. 

What should you do? 

A. Enable Peer Discovery firewall rules. 

B. Set the Startup Type of the BranchCache service to Automatic, and then start the service. 

C. At the command prompt, run netsh.exe branchcache set service mode=DISTRIBUTED. 

D. At the command prompt, run netsh.exe branchcache set service mode=HOSTEDCLIENT. 

Answer: B 

Q122. - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. The domain contains two sites named Site1 and Site2. The servers for the sites are configured as shown in the following table. 

Server1 hosts a standard primary zone for contoso.com. Server2 hosts a secondary zone for contoso.com. 

You need to ensure that all DNS replication traffic between Server1 and Server2 is encrypted. 

What should you do? 

A. On Server1, configure DNSSEC for the contoso.com zone. 

B. On Server1, convert the contoso.com zone to an Active Directory-integrated zone. 

C. On each server, create connection security rules. 

D. On each server, enable Encrypting File System (EFS) encryption for the contoso.com.dns file. 

Answer: C 

Q123. - (Topic 2) 

Your company has a main office and a branch office. 

The network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 is located in the main office. Server2 is located in the branch office. 

You have a domain-based namespace named \\contoso.com\DFS1. Server1 is configured as the namespace server for \\contoso.com\DFS1. 

\\contoso.com\DFS1 has a folder named Folder1. The folder targets for Folder1 are \\Server1\Folder1 and \\Server2\Folder1. 

Users in the main office report that they view different content in Folder1 than users in the branch office. You need to ensure that the content in Folder1 is identical for all of the users. 

What should you do? 

A. Create a new replication group. 

B. Configure Server2 as a namespace server. 

C. From Server2, run dfsutil.exe cache domain. 

D. From Server2, run dfsutil.exe root forcesync \\contoso.com\DFS1. 

Answer: A 

Q124. - (Topic 2) 

Your network contains a Network Policy Server (NPS) named Server1. Server1 is configured to use SQL logging. 

You add a second NPS server named Server2. 

You need to ensure that Server2 has the same RADIUS authentication and logging settings as Server1. You export the NPS settings from Server1, and then import the settings to Server2. 

What should you do next on Server2? 

A. Create a new ODBC data source. 

B. Run netsh.exe nps reset config. 

C. Manually configure the SQL logging settings. 

D. Restart the Network Policy Server (NPS) role service. 

Answer: C 

Q125. - (Topic 1) 

Your network contains a server named DC1 that has the DHCP Server server role installed. 

You discover the following warning message in the Event log of DC1: "The DHCP service encountered the following error while cleaning up the database: An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error." 

You need to resolve the warning message. 

What should you do? 

A. Restore the database from a backup. 

B. Increase the database cleanup interval. 

C. Configure Routing Information Protocol version 2 (RIPv2) on the router. 

D. Configure name protection. 

E. Reconcile the scope. 

F. Authorize DC1 in Active Directory. 

G. Configure Open Shortest Path First (OSPF) on the router. 

H. Compact the database. 

I. Configure DHCP link layer-based filtering. 

J. Modify the start address. 

K. Configure a DHCP Relay Agent. 

Answer: A 

Down to date microsoft server 70-642:

Q126. - (Topic 1) 

Your network contains a DHCP server that is configured as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that the DHCP server can respond to DHCP clients. 

What should you do? 

A. From the DHCP console, authorize the DHCP server. 

B. From the Services console, start the DHCP Server service. 

C. From Network Connections, modify the IPv4 properties and the IPv6 properties. 

D. From the Local Users and Groups snap-in, add the Server3 computer account to the DHCP Administrators group. 

Answer: A 

Q127. - (Topic 2) 

Your network contains a print server named Server1. Server1 has three shared printers named Printer1, Printer2, and Printer3. Each shared printer uses a different driver. 

You need to ensure that if Printer1 causes an exception, users can still print to Printer2 and Printer3. 

What should you do? 

A. Add a driver filter. 

B. Add a printer filter. 

C. Modify the print processor options. 

D. Modify the driver isolation settings. 

Answer: D 

Q128. - (Topic 3) 

Your network contains a server named Server1 that runs Windows Server 2008 R2 Service pack1 (SP1). 

Server1 has Microsoft SQL Server 2008 R2 and the File Services server role installed. 

You need to log the CPU utilization of the processes running on Server1 if the CPU utilization exceeds 85 percent for more than one minute. 

What should you do? (Each correct answer presents part of the solution. Choose two.) 

A. Configure an action on the performance alert to run the systempropertiesperformance.exe command. 

B. Create a Data Collector Set that has a performance alert to run the \Processor (_Total)\%Processor Time. 

C. Enable the SQMLogger event trace session. 

D. Create a scheduled task that runs the Get-PSProvider cmdlet. 

E. Configure a trigger on the performance alert to start the System Performance Data Collector Set. 

Answer: B,E 

Q129. - (Topic 2) 

Your network contains a server named Server1 that runs Windows Server 2008 R2. 

You have a user named User1. 

You need to ensure that User1 can schedule Data Collector Sets (DCSs) on Server1. The solution must minimize the number of rights assigned to User1. 

What should you do? 

A. Add User1 to the Performance Log Users group. 

B. Add User1 to the Performance Monitor Users group. 

C. Assign the Profile single process user right to User1. 

D. Assign the Bypass traverse checking user right to User1. 

Answer: A 

Explanation: 

Both A and B are valid users group but: Performance Log users group : Members of this group may schedule logging of performance counters, enable trace providers, and collect event traces both locally and via remote access to this computer Performance Monitor users group : Members of this group can access performance counter data locally and remotely. Hence answer is "A". 

Q130. - (Topic 4) 

You need to ensure that only the members of the Power Users group and the members of the Administrators group can view the events in the System log. 

Which tools should you use? 

A. Local Users and Groups 

B. Limit-EventLog 

C. Secedit 

D. Local Group Policy Editor 

Answer: D 

Explanation: 

* The Local Group Policy Editor is a Microsoft Management Console (MMC) snap-in that provides a single user interface through which all the settings of Local Group Policy objects can be managed. *Security Policy Settings: Event Log: The Event Log service records events on the system by writing to one of three default logs that you can read in Event Viewer: the security, application, and system logs. The security log records audit events. You use the settings under Event Log to specify attributes of the security, application, and system logs, such as maximum log size, access rights for each log, and retention settings and methods. 

Incorrect: 

Not B: Limit-EventLog sets the event log properties that limit the size of the event log and the age of its entries. 

Not C: Configures and analyzes system security by comparing your current configuration to at least one template.