hpe6-a41 Guide

What Top Quality Hpe6-a41 Simulations Is

It is impossible to pass HP hpe6-a41 exam without any help in the short term. Come to Exambible soon and find the most advanced, correct and guaranteed HP hpe6-a41 practice questions. You will get a surprising result by our Latest Applying Aruba Switching Fundamentals for Mobility practice guides.

Online HP hpe6-a41 free dumps demo Below:

NEW QUESTION 1
An ArubaOS switch is protected with a manager password. The network administrator wants to back up the configuration and apply it to other switches. The administrator wants the manager password to be available in both the saved and running configuration.
To accomplish this goal, what must the administrator do before the configuration is backed up?

  • A. Enter the password command with the plaintext option.
  • B. Configure an SSH keypair on the switch.
  • C. Enter the include-credentials command.
  • D. Ensure that the server to which the configuration will be backed up uses SCP as opposed to TFTP.

Answer: C

NEW QUESTION 2
A network administrator has copied new software to an ArubaOS switch and placed this software in the secondary ash location. The switch is currently booting from the primary location. The administrator wants the switch to start using the new software.
What should the administrator do to accomplish this?

  • A. Reboot the switch, which automatically causes the switch to use the newer software.
  • B. Execute the command to boot the system from the secondary flash.
  • C. Rename the secondary software as the primary software.
  • D. Copy the secondary software to the primary software slot.

Answer: B

NEW QUESTION 3
Refer to the exhibit.
HPE6-A41 dumps exhibit
MSTP is implemented in the topology shown in the exhibit, and all the switches are in the same region. The network administrator does not want to use the Internal Spanning Tree (IST) or instance 0 for production traffic.
How many non-IST spanning tree instances does this network need in order to have effective load sharing on the uplinks from the access switches?

  • A. two
  • B. three
  • C. four
  • D. five

Answer: C

NEW QUESTION 4
A network administrator discovers and then authorizes several ArubaOS switches in Aruba AirWave. Immediately after the administrator authorizes the switches, AirWave cannot communicate with the switches anymore.
What should the administrator do to restore communication?

  • A. Change the SNMP and Telnet/SSH credentials in the AirWave global communication settings to match those on the switches.
  • B. Change the management level for the switches to Monitoring and Firmware Updates Only.
  • C. Specify the SNMP and Telnet/SSH credentials on the switches to update the individual communication settings on the switches.
  • D. Change the management level for the switches to Manage Read/Write.

Answer: C

NEW QUESTION 5
How does a wireless network differ from a wired network?

  • A. A wireless network is a shared medium, while a modern wired network typically works in full-duplex mode.
  • B. A wireless network is inherently more secure than a wired network.
  • C. A wireless network does not use source and destination MAC addresses, but a wired network does.
  • D. A wireless network does not support encryption, unlike a wired network, which can support encryption.

Answer: A

NEW QUESTION 6
Refer to the exhibit.
HPE6-A41 dumps exhibit
HPE6-A41 dumps exhibit
A network administrator executes this command on an ArubaOS switch, Switch-2: Switch-2(config)# ip route 10.1.100.0/24 10.1.1.1
The administrator successfully pings Device 1 at 10.1.100.42 from Switch-2. However, Device 2 cannot ping Device 1.
The administrator confirms that Device 1 is correctly set up.
What should the administrator check on Switch-2 to resolve this issue?

  • A. that ARP proxy is enabled
  • B. that IP routing is enabled
  • C. that spanning tree is disabled
  • D. that ICMP is enabled

Answer: B

NEW QUESTION 7
Refer to the exhibit.
HPE6-A41 dumps exhibit
A company has an existing Aruba Instant cluster with several Instant APs (IAPs), as shown in the exhibit. The network administrator orders a new IAP and boots it for the first time by connecting it to the PoE switch port shown in the exhibit.
What happens after the IAP boots?

  • A. The IAP attempts to contact AirWav
  • B. If it is able to reach AirWave and obtain the current VC (master) IP address, it joins the cluster.
  • C. The IAP fails to join the cluster because the administrator has not yet connected to its Instant SSID andprovisioned it.
  • D. The IAP undergoes an election process with the current VC (master). It takes the VC role if it has a higher MAC address unless the current VC is configured as the preferred VC.
  • E. The IAP hears the messages from the current VC (master), and it joins the cluster without the occurrence of a new election.

Answer: A

NEW QUESTION 8
Refer to the exhibit. Exhibit 1.
HPE6-A41 dumps exhibit
Exhibit 2.
HPE6-A41 dumps exhibit
The routing configuration must support this behavior:
What must the network administrator change to meet these criteria?

  • A. On Switch 3, add a route to 192.168.2.0/24 through 192.168.1.9 and a route to 192.168.3.0/24 through 192.168.1.5.
  • B. On Switch-1, Switch-2, and Switch-3, change the next hop in each static route to specify an IP address that exists on that switch.
  • C. On Switch-1, raise the administrative distance for the second route to 192.168.3.0/24; on Switch-2, raise the administrative distance for the second route to 192.168.2.0/24
  • D. On Switch-1, add a route to 192.168.1.8/30 through 192.168.0.3; on Switch-2, add a route to 192.168.1.4/30 through 192.168.1.1; on Switch-3, add a route to 192.168.1.0/30 through 192.169.1.4.
  • E. On Switch-1, add a route to 192.168.1.8/30 through 192.168.1.2; on Switch-2, add a route to 192.168.1.4/30 through 192.168.1.1; on Switch-3, add a route to 192.168.1.0/30 through 192.168.1.4.

Answer: C

NEW QUESTION 9
A network administrator wants to disable physical interfaces 13-24 on an ArubaOS switch. How can the administrator do this?

  • A. Assign the range of interfaces to a VLA
  • B. Then, disable the VLAN.
  • C. Create a named range for interfaces 13-24. Then, disable the named range.
  • D. Create a named port group for interfaces 13-24. Then, disable the named port group.
  • E. Use the interface disabl comman
  • F. Specify 13-24 for the ID.

Answer: D

NEW QUESTION 10
Refer to the exhibit.
HPE6-A41 dumps exhibit
The student A client needs to connect to FTP Server B. Student A sends the necessary ARP request and receives a reply.
Which destination MAC address does the Student A client use in the FTP packet to FTP Server B?

  • A. 00-1D-B3-F1-EF-40
  • B. 00-E0-52-F0-44-87
  • C. 00-1D-B3-F1-EF-31
  • D. 00-E0-52-F0-41-B2

Answer: A

NEW QUESTION 11
What is one benefit that Aruba AirWave can provide to a customer with ArubaOS switches?

  • A. It can audit switch firmware (software) and automate updates.
  • B. It can enable the switches to provide mobility controller functions for connected Instant APs (IAPs).
  • C. It can provide centralized authentication and authorization for users who log in to the switch CLI.
  • D. It can program the switches to dynamically adjust QoS settings to prioritize Skype for Business traffic.

Answer: A

NEW QUESTION 12
Refer to the exhibit.
HPE6-A41 dumps exhibit
A network administrator wants to set up a link aggregation between two switches, as shown in the exhibit. The link aggregation must meet these requirements:
HPE6-A41 dumps exhibit Protects against misconfiguration
HPE6-A41 dumps exhibit Can be configured with VLANs and other settings Which type of link aggregation should the administrator create?

  • A. dynamic LACP
  • B. static LACP
  • C. manual (trunk)
  • D. distributed (trunk)

Answer: B

NEW QUESTION 13
Member 1 is the commander of a Virtual Switching Framework (VSF) fabric. A power disruption causes member1 to go down. What happens when power is restored and member 1 boots?

  • A. Member 1 fails to rejoin the VSF fabric, and the error disrupts member 2.
  • B. Member 1 rejoins the VSF fabric and becomes the commander.
  • C. Member 1 rejoins the VSF fabric, and member 2 continues to act as commander.
  • D. Member 1 fails to rejoin the VSF fabric, and member 2 continues to act as commander.

Answer: B

NEW QUESTION 14
Refer to the exhibit.
HPE6-A41 dumps exhibit
HPE6-A41 dumps exhibit
Switch 1 shown in the exhibit is an ArubaOS switch that has an uplink to the network core on interface 25. The network administrator wants to add a link on interface 26. The administrator creates a link aggregation with this command:
Switch1 (config)# trunk 25-26 trk1 lacp
What else must the administrator do to enable the Switch 1 link aggregation to successfully pass all traffic to the core?

  • A. Configure VLANs 10 and 20 as tagged VLANs on interface 26.
  • B. Configure VLANs 10 and 20 as tagged VLANs on trk1.
  • C. Enable BPDU filtering on interface 26.
  • D. Enable LACP in active or passive mode on interfaces 25 and 26.

Answer: A

NEW QUESTION 15
A network administrator wants to deploy Aruba Instant APs (IAPs) at a remote site that does not have Internet access. The APs should receive their configuration automatically from AirWave by using Zero Touch Provisioning (ZTP). What does the administrator need to configure?

  • A. the name and password of a user with full administrative rights to AirWave
  • B. the name of the AirWave VLAN with the configuration that the APs should use
  • C. the DHCP server configured with options 43 and 60 for ZTP
  • D. the IP address for the DNS server with the mapping for the airwave hostname

Answer: C

NEW QUESTION 16
For which task does a network administrator need to access the enable context on an ArubaOS switch?

  • A. to view interface statistics
  • B. to view CPU statistics
  • C. to ping an IP address
  • D. to view configuration files

Answer: D

NEW QUESTION 17
Refer to the exhibit.
HPE6-A41 dumps exhibit
Endpoint A sends broadcast ARP requests. Where are these requests received?

  • A. at EndpointC
  • B. at EndpointB
  • C. at EndpointB, at EndpointC, and at EndpointD
  • D. at EndpointB and at EndpointC

Answer: A

NEW QUESTION 18
A network administrator prepares an ArubaOS switch to be monitored and managed by AirWave. Which credentials are required for AirWave to change configuration settings on the switch?

  • A. RADIUS shared secret
  • B. SNMPv2c community with manager unrestricted privileges
  • C. Telnet or SSH password
  • D. SNMPv3c user in the ManagerPriv group

Answer: A

NEW QUESTION 19
Refer to the exhibit.
HPE6-A41 dumps exhibit
The network administrator wants to place contractor clients and employee clients in different broadcast domains.
How should the administrator achieve this goal?

  • A. Add a router in between Switch 1 and Switch 2. Configure a different subnet on each router interface.
  • B. Create two MSTP instances on each switc
  • C. Assign ports connected to contractor clients to one instance and ports connected to employee clients to the other instance.
  • D. Assign the switch ports connected to contractor clients to one VLAN and ports connected to employee clients to another VLA
  • E. Extend the VLANs between the switches.
  • F. Create two device profile
  • G. Apply one profile to ports connected to contractor clients, and apply the other profile to ports connected to employee clients.

Answer: C

NEW QUESTION 20
Which security options for a WLAN can authenticate either the computer or the user?

  • A. Open with MAC authentication
  • B. MAC authentication with WPA2 Enterprise (802.1X) fail-thru
  • C. Personal (preshared key) authentication with WEP
  • D. Personal (preshared key) authentication with WPA2

Answer: B

NEW QUESTION 21
What is one advantage of OSPF over static routing?

  • A. OSPF allows ArubaOS switches to use default routes, while static routes cannot use 0.0.0.0/0 as the destination network.
  • B. OSPF has a lower default administrative distance than static routing on ArubaOS switches.
  • C. OSPF better meets the needs of a complex topology with many redundant routes that static routing.
  • D. OSPF permits load sharing traffic over multiple routes, while static routing does not.

Answer: C

NEW QUESTION 22
......

Thanks for reading the newest hpe6-a41 exam dumps! We recommend you to try the PREMIUM 2passeasy hpe6-a41 dumps in VCE and PDF here: https://www.2passeasy.com/dumps/hpe6-a41/ (125 Q&As Dumps)


To know more about the hpe6-a41, click here.

Tagged as : HP hpe6-a41 Dumps, Download hpe6-a41 pdf, hpe6-a41 VCE, hpe6-a41 pass4sure, examcollection hpe6-a41